Signalking Sk-11tn Driver !LINK! Download
Download === https://urlgoal.com/2tzoud
How to Install and Test SignalKing SK-11TN Wireless USB Adapter
If you are looking for a high-power wireless USB adapter that can provide a stable and long-range connection, you may want to consider the SignalKing SK-11TN. This device has a 58dBi directional antenna that can capture signals from up to 3 km away in open space. It also has a Ralink 3070 chipset that supports IEEE 802.11 B/G/N standards and is compatible with various operating systems and hacking tools.
However, before you can use the SignalKing SK-11TN, you need to install the driver that matches your system. In this article, we will show you how to download and install the driver for Windows 10, as well as how to test the device using a YouTube video.
Step 1: Download the Driver
The first step is to download the driver that corresponds to your Windows 10 version. You can find the driver from one of these sources:
YouTube video by Chi Tech: This video shows how to install and test the SignalKing SK-11TN on Windows 10. It also provides links to download the driver from different websites in the description section.
All Drivers: This website offers a direct download link for the Ralink RT3070 driver, which is compatible with the SignalKing SK-11TN.
Windows 10 Download: This website provides a list of MediaTek (Ralink) wireless LAN drivers for Windows 10, including the RT3070 driver.
After you download the driver, you need to unzip it and save it in a folder on your computer.
Step 2: Install the Driver
The next step is to install the driver on your computer. To do this, follow these steps:
Plug in the SignalKing SK-11TN to your computer's USB port.
Go to Device Manager and look for Network adapters. You should see a device named Ralink Wireless LAN Card or something similar.
Right-click on the device and select Update driver.
Select Browse my computer for driver software.
Select Let me pick from a list of available drivers on my computer.
Select Have disk and browse to the folder where you saved the driver.
Select the .inf file that matches your system (e.g., Win7x64 for Windows 7 64-bit).
Click OK and follow the instructions to complete the installation.
After you install the driver, you should see a new wireless network icon on your taskbar. You can click on it to scan for available networks and connect to them.
Step 3: Test the Device
The final step is to test the device and see how well it works. You can do this by following the YouTube video by Chi Tech, which shows how to use the SignalKing SK-11TN with various hacking tools such as BackTrack, Beini Reaver, Wifislax, Xiaopan, Dumpper, and JumpStart. You can also use other tools or applications that require a wireless connection.
To test the device, you need to switch it to monitor mode, which allows it to capture packets from other networks. To do this, follow these steps:
Open a command prompt as administrator.
Type netsh wlan show drivers and press Enter. You should see a line that says Monitor mode supported: Yes.
Type netsh wlan set hostednetwork mode=allow ssid=Test key=12345678 and press Enter. This will create a virtual network named Test with a password of 12345678.
Type netsh wlan start hostednetwork and press Enter. This 061ffe29dd