Icom Cloning Software CS-P7 For Icom IC-E7 Free [VERIFIED] Download
Download >> https://bltlly.com/2tyDeP
How to Use Icom Cloning Software CS-P7 For Icom IC-E7
If you own an Icom IC-E7 handheld transceiver, you may want to use the Icom Cloning Software CS-P7 to program your radio settings and memories. This software allows you to connect your IC-E7 to your computer via a USB cable and edit the frequency, tone, offset, scan list, and other parameters of your radio. You can also backup and restore your radio data using the software.
In this article, we will show you how to download and install the Icom Cloning Software CS-P7 for free, and how to use it to clone your IC-E7. Please note that this software is compatible with Windows XP, Vista, 7, 8, and 10 operating systems.
How to Download and Install Icom Cloning Software CS-P7
To download the Icom Cloning Software CS-P7 for free, you need to visit the official Icom website and register as a user. You can do this by following these steps:
Go to https://www.icom.co.jp/world/support/download/firm/IC-E7/1_00/ and click on the "Download" button.
Fill in the required information and agree to the terms and conditions. Then click on "Register".
You will receive an email with a link to download the software. Click on the link and save the file to your computer.
Unzip the file and run the setup.exe file. Follow the instructions to install the software on your computer.
How to Use Icom Cloning Software CS-P7 to Clone Your IC-E7
To use the Icom Cloning Software CS-P7 to clone your IC-E7, you need to connect your radio to your computer via a USB cable. You can do this by following these steps:
Turn off your IC-E7 and connect it to your computer using a USB cable. Make sure the cable is firmly inserted into both devices.
Turn on your IC-E7 and wait for the computer to recognize it. You may need to install a driver for the USB connection if it is not already installed.
Launch the Icom Cloning Software CS-P7 on your computer. You should see a window like this:
To read the data from your IC-E7, click on "File" and then "Read from Transceiver". You should see a progress bar indicating the data transfer.
To edit the data on your computer, click on any of the tabs at the top of the window. You can change the frequency, tone, offset, scan list, and other parameters of your radio. You can also add or delete memory channels as you wish.
To write the data back to your IC-E7, click on "File" and then "Write to Transceiver". You should see a progress bar indicating the data transfer.
To backup or restore your radio data, click on "File" and then "Save As" or "Open". You can save or open a .icf file that contains all your radio settings and memories.
Congratulations! You have successfully used the Icom Cloning Software CS-P7 to clone your IC-E7. You can now enjoy using your customized radio settings and memories. 061ffe29dd